by John ‘Miklor’
Four years after its initial design, the VGC 6600PRO has evolved into the BTech UV-50X3, a full featured Tri-Band mobile that delivers a full 50W on VHF and UHF, with addition of a 220 MHz module that delivers 5W output. The 220 MHz module was specifically designed and filtered for 222-225MHz US ham band operation. I mention this as there are currently radios being advertised as Tri-Band operating in the range of 240-260MHz that are not adaptable to frequencies below 240MHz due to their internal filtering.
Included with the radio are:
50X3 Weight: Main Chassis 2.1kg (4.6 lbs)
The 50X3 is FCC Part 90 certified for commercial use in the US.
The suction mount is about the best I’ve ever used. It requires a smooth metal or glass surface, but the silicon rubber cup will not let loose. My control head has been mounted atop my computer for over a month, and it is going nowhere.
The button functions are displayed on the LCD screen for easy function identification. The PTT button on the upper right is for Momentary or Toggle PTT. One press turns the TX on, next press turns it off. Setting to Toggle is convenient if running a net or using a mobile headset.
The 220 ham band transmit range is limited to 222-225MHz. The receiver is capable of being programmed above and below those frequencies, but may be outside of the performance range due to the ham band specific filtering.
The radio comes with a full function keypad style microphone. On the right side are two slide switches that control the Lock and Lamp feature, and on top of the microphone are two frequency Up and Down buttons. Along with a 16 button DTMF style keypad are 4 programmable function keys. Choices are Squelch Off, TX Power, Rptr Shift, Reverse, and Tone Call.
There are two microphone input jacks. One on the control head, the other on the main unit. There is also a built in microphone element inside the control head. Although the audio quality is excellent, the sensitivity is that of a standard microphone. The OTA reports were excellent with plenty of audio, so there’s no reason to shout.
A nice feature in the audio section is an adjustable microphone gain control. There are 5 settings available. Min, Low, Normal, High, and Max. Normal is great for speaking in a normal volume an inch from the microphone. Running a net with VOX and a headset, you can bring it up a bit. Driving in an off road vehicle, you just might need to set it back.
Along with the standard VHF / 220 / UHF frequencies, the receiver covers:
0.5-1.7 MHz (AM Radio)
The control head has built in speakers, as well as one in the main module. An external speaker jack in the rear also allows for a larger speaker if desired. The jack provides for either mono or stereo output. (each receiver can have it’s own speaker). I found a menu setting to adjust the tone of the speaker as well. Although there is more than ample audio output, when the volume control is all the way down, the radio is silent, as it should be.
Cross Band Repeat
The radio takes full advantage of the independent receiver by including a Cross Band Repeat function. I entered the VHF and UHF frequencies, power level and tones, selected the Cross Band mode, and was ready to go. The audio levels are preset and the audio quality reports were excellent.
Cross band repeating using a 220MHz frequency was not possible. This is more than likely a precaution due to the minimal frequency separation.
The control head has a large 5″ LCD with your choice of background colors. Options include White-Blue, Sky-Blue, Marine-Blue, Green, Yellow-Green, Orange, Amber, and White. The brightness and contrast are also menu selectable.
Unless you are only entering a few channels, I would recommend the optional PC05 programming cable. The UV-50X3 uses the CHIRP programming software.
Scanning in the VFO mode allowed me to scan either the VHF, 220MHz, or UHF band. In the Channel mode, the scan would select any channel in the list regardless of band.
There are radios that draw less power whose power cables use thinner wire, lower value fuses, and can be plugged into accessory plugs. Do NOT use these cables, even though they may be plug compatible. The 50X3 draws twice the current, and will blow the fuses and possibly overheat the wire.
The cable on the 50X3 appears to match that of the hi-power Yaesu, Icom, Kenwood series. ONLY use the proper cable for the radio.
Base Station Operation
For mobile drive testing, I teamed this radio with a Nagoya Tri-Band TB320A and SB-35 NMO mag mount and the results were excellent.
Some of the added advantages to the US market are the FCC Part 90 certification, local US support, and exclusive program support using CHIRP software. The radio can also be shipped worldwide by contacting BTech directly.
This is definitely one of the nicest mobile transceivers I’ve used; and yes, I’ve owned the “big 3”.
More Information: Miklor.com
The VGC VR6600PRO has been in my shack four days now. These are just first impressions; we didn’t do any measurements yet.
- The radio itself (main unit + front panel)
- Suction cup
- High quality power cable, no cheap round fuses, but the ones used in cars
- Separation cable
Extra (these are optional accessories):
- BTG-6600A1 (GPS & APRS module)
- PG-660 data cable
- GPS antenna
The manual is brief but clear. No funny / bad translations.
It takes a while to get accustomed to the menus, but I got the radio up and running within 15 minutes. Programming the 1000 memories is not difficult, but the radio isn’t very patient — within two seconds or so the menu will be gone. This should be extended somewhat; more than once I wasn’t fast enough. 10 seconds or so would be nice.
The suction cup is as strong as a horse, but it needs a perfectly smooth surface in order to be reliable. In the shack I use a ‘mouse pad’ made out of glass, a present I once got from Intel. Imperfect surfaces failed, some quickly, some overnight.
No ‘Chinese Disease’ here: loud and clear. In the menu you can adjust the microphone gain to match your voice.
Not too bad for home use, but the built-in speakers won’t have enough punch for mobile use. Buy external ones. Plural? Yes, you can connect two speakers to the radio, one for the left VFO and one for the right VFO. You can choose Stereo or Mono, when set to ‘Mono’ one speaker will do too. There’s a tone control in the menu, which allows you to match the tonal quality to the speakers in use.
No noisy AF amplifier, fortunately, and no volume problems. Volume to zero = silence.
Colors, brightness and contrast can all be set in the menu.
Front: DTMF keypad, four programmable buttons. Right side: lock switch, backlight switch. PTT switch is smooth and won’t give you the cramps.
There’s a slight delay between giving a command and the radio carrying it out. I would describe it as ‘a bit sluggish’.
Slow, about 1.5 – 2 channels / second. This radio is clearly not a competitor for a real scanner.
General Coverage RX
This works surprisingly well, even a few (strong) medium wave stations could be received on a Diamond X30 antenna, which is basically useless for these low frequencies. 1.25 Meters (220 MHz) is there too, but my European version won’t transmit there.
APRS & GPS
Not tested yet.
I might have found a minor one, but I’m not 100% sure. The VGC engineers enjoy their spring festival holiday now, so an answer will take some time. VGC confirmed that the firmware will be upgradeable.
Oh yes, the fan!
The fan is a funny one. It comes with a special power connector and a temperature switch (TO220 size). The bracket has been designed in such a way that you can mount the fan just below it. Spacers between the bracket and the fan guarantee a good airflow. If the radio gets too hot, the the fan will switch on.
Mindy from Vero Telecom asked me to share this information with all of you: there’s an opportunity for licensed hams to test drive their dual-band radio.
Important Update: read the terms and conditions first! – http://www.verotelecom.com/~verotele/test-letter.htm
The radio won’t be free of charge, but you will get a $100 discount after submitting your test report.
The application form can be found here.
Vero Telecom sent me an e-mail today announcing that you can pre-order the VR-6600PRO, just click on the ‘Buy It Now’ button below to go to their website. No price is mentioned; you might want to e-mail Vero Telecom before filling in your details.
R.I.P. VR-6600P: the radio has been replaced before it even saw the light of day. Instead Vero Telecom introduced the VR-6600PRO, an updated version of the radio we all so desperately wanted to get our hands on. Vero writes:
Good day to you.
Thank you for focusing on our new product — VR-6600PRO. Now, it is time to show VR-6600PRO to you. VR-6600PRO adopts many suggestions from HAMs. As well VR-6600PRO uses much optimal design of ergonomics. Please check the detailed videos for VR-6600PRO.
We will arrange a free sample to you test as soon as possible.
1. The VR-6600P with the DOUBLE RF MOSFET MODULE, and can provide very smooth power from the V band to U band.
2. 8 colors LCD backlight to choose, you will be safer because you can freely adjust the brightness of the backlight and button light, as well as automatic backlight setting
3.The handsfree function is realized with the mini-microphone built in the panel.
The stereo speakers built in the panel helps the automatically identify the signal.The speaker sounds simultaneously when receive single signal,and it sounds respectively when receive dual signal.
5. With high performance and convenience, the turn 360°new suction cup mounting bracket can firmly suck on different rough plane, and makes it easy to remove without screws.
6.With the dual speaker installed, you can freely choose the microphone connectors whether on the mainframe or panel.
7.The mainframe is solid and break-resistant. Passive cooling adopted, the longevity of mainframe will not be affected by the dust absorbed on it.
8. A data jack is uniquely installed in the mainframe.
9.Three speaker system(two in panel and one in main frame ) allows you to have more options.
10. Multi-functional DTMF microphone is ergonomically designed, which makes you feel well and operate more conveniently. etc.
You will be surprised to find more distinctive features when VR-6600pro at hand.
Sales Dept –Sales Manager