Sainsonic GT-3, GT-3 Mark II additional notes

Thanks to a reader in Denmark I ran into a new, undocumented feature present in modern UV-5R varieties which have both a Band and an A/B button. The feature has been confirmed in the GT-3, GT-3 Mark II and the to-be-reviewed GT-3TP, but might be true for recent UV-5Rs also.

1750 Hz and 2100 Hz burst tones
In most parts of the world burst tones were once used to open up repeaters but abandoned in favor of CTCSS.  It’s one of the reasons why I don’t look into that feature too closely anymore; it became sort of irrelevant. Some European repeaters will still open up when a 1750 Hz tone is transmitted in order to stay compatible with older ham equipment.

Without notifying anyone (what’s new) Baofeng added the 2100 Hz burst tone to its bag of tricks. The problem is that this tone is not documented anywhere in the manual, and that they use the Band key to generate 2100 Hz instead of 1750 Hz. So, if you follow the manual, you’ll send 2100 Hz instead of 1750 Hz.

This is what you should do:

  • Ignore the manual
  • press PTT + A/B to generate 1750 Hz
  • press PTT + Band to generate 2100 Hz.

I mailed this to John ( so it can be included in the documentation.

Burst Tones

GT-3 antennas
The SMA thread on GT-3 antennas isn’t very precisely made. You might feel some resistance once every 180 degrees when screwing it on. It’s no biggie an will resolve itself after some use, but worth knowing.

UV-5R ‘reverse’ function oddity
When you have a repeater programmed in one of the memories and assuming you only programmed a CTCSS tone for TX, not RX, you would expect CTCSS to be irrelevant when listening reverse. That’s not the case; your Baofeng will ‘invent’ R-CTCSS on the fly. According to some hams this behavior can also be found on certain Kenwood models.

6 comments on “Sainsonic GT-3, GT-3 Mark II additional notes

Comments are closed.