After a long time the Dutch 10 meter repeater, PI6TEN, is back on the air. TX frequency is 29.690MHz, input is on 29.520MHz. No CTCSS needed.
I’m curious if any of my non-Dutch readers can hear the signal or, even better, can open it up. If you have Echolink, you can check your own signal when you connect to PI6TEN-R.
Rx location Alticom radio tower Witte Kruislaan- Hilversum 52°13’20N – 05°10’09E |
Tx location PI6HVS building Kapittelweg – Hilversum 52°12’54N – 5°8’36E |
Receiving information | |
Antenna | : Hi-gain |
Antenna gain | : 0 dBi |
Antenna height | : 140m above sea level |
Receiver | : R&S ESMC |
Frequency | : 29.590 Mhz |
Polarisation | : Vertical |
Transmitting information | |
Antenna | : Antron 99 |
Antenna gain | : 0 dBi |
Antenna height | : 60m above sea level |
Transmitter | : Motorala |
Frequency | : 29.690 Mhz |
Output power | : 60 Watts |
Polarisation | : Vertical |
Other information | |
Echolink | : PI6TEN (#512885) |
CTCSS | : none |
10m a little flat here at the momment, (JO00DT) but will have a listen.
Pingback: PI6TEN is back ! | Radioamateurs-France